-
S5 MAX Chassis Specification:
Net Weight:3.0kg
Package Weight: 3.9KG
Case Size: 350*160*280mm
Radiator: 135mm Height Tower Cooler Or 180 Liquid Cooler
Case Fan:(buttom)9cm fan*3, (top) 9cm fan *2, compatible with 180 liquid cooler,(rear) 9cm fan *1
Material: 0.8~1.0mm steel, 3mm tempered glass
Graphics Card: 335mm Length/PSU length in 140mm,250mm Length/PSU length beyond 140mm
Motherboard: M-ATX Motherboard, 245*245mm
PSU: ATXSFX/SFX-L
HDD Support:3.5 inch HDD*1 (occupies 2 fan spaces at the bottom),2.5inch SSD*2
Control Panel:USB3.0 Type-C port USB3.0 Type-A port
B***o –
It’s definitely smaller than a domestic mini-tower. 15 liters or so ATX power-fly, M-ATX motherboard are all available. The cable line clearance is a little difficult, but it doesn’t matter because it doesn’t shine. The cooling fan is only a 90mm fan. This is a little bumbling. And the paint coat will peel off well. Is that enough to fall or not, and the thread marks are certainly occurring?
Y***n –
It is beautiful and neat, but it is difficult because it cannot be equipped with a hard. It’s not very limited by the length of a CIFUS cooler or graphics card, so if you don’t use a top-level cooler or a glka there will be no problem. You don’t have to use a board or power for an expensive SFF. It can cover up to approximately current Zen 7 3 slots & Early 300mm 4080s. Graphics card 3 slots is the maximum.
M***a –
Pretty good case at 85$, not more but if you want the smallest case that will fix an mATX board, small full ATX PSU and 3 fan gpu, this is it. It will even fit 2 120mm fans at the bottom, even with 5mm spacers. You’ll have to use the smaller holes for mounting and not all fan screws will fit through those so be careful. I also mounted the PSU with the fan facing the CPU cooler, which also takes a bit of work, and I have a 120mm intake fan on top next as close ro the PSU as the extension cable would allow. I have a 92mm exhaust fan at the back and I might add another 92mm exhaust at the top near the back. The handle works surprisingly well depite my PC being pretty heavy. The finish is ok. Packaging is good but the support bracket for the PSU arrived a little bent and some of the other parts aren’t quite straight. Where you screw in the gpu feels a bit flimsy, like if you screw in too hard it will strip, it should be thicker. Shipping is slow but this is expected.
Customer –
Good and sturdy case.
Customer –
Very good case for the price and packaging was very good and secure
K***r –
The hard mounting is an obstacle. Due to the hard, the graphics card and space become scarce, the line summary becomes more or less. Except that, I’m satisfied.
J***h –
Cheap. Satisfaction. However, the details are a little down. It contains a dust filter, but the top and side plates are fine, but the fan screw hole does not fit in the lower plate. Personally, I don’t need a dust filter, but it was very nice to throw it away. There is only the power button on the front, and the reset button of course no and no led at all. No audio terminals either. It may be rather good because it is simple. The front c terminal …. inside is just connecting to the 3.0 header. I have a header for the USB-C port on the mainboard, which is a waste for some reason.
l***a –
very good case
j***r –
It is a simple case. Same as the product description.
P***r –
Really nice simple design that fits well into a medical environment. Too bad that there is a minute enamel chip on the cover despite excellent packaging. Not bad enough to warrant a complaint.
b***E –
13 dollars per dog, this is the quality at this price… It must have been thrown back and back, but even the box I’m embarrassed because there’s no place to dent. The thickness of the iron plate is also thick. I think I’m looking like a thief. I am satisfied with Taiwan.
k***r –
I received it well, right? I hope it’s better than other companies. I received it well once, right? If it’s better than other companies, it’s good. I hope it’s better than a third party.
H***n –
There are many cases smaller than this, This is a smaller case that is more efficient I think there is no Well bought.
H***i –
It’s like the smallest case with ATX power on the M-ATX board. It was possible to recycle all the parts that were originally used, and it is a tight case that I wanted. Instead, there is no case base fan and the size is small, so the original case fan is connected with a cable tie and only one I’m equipped