Operation method
1. Before powering on, fill the water tank with clean water (distilled water or purified water is recommended), and observe for water leakage after filling. The distance between the liquid level and the cover plate should not be less than 2-4cm.
2. Plug in the power, turn on the device, and the upper row of the instrument display window shows the current water temperature value, while the lower row shows the set value.
3. Activate the “Cycle” button (this function is available for models with magnetic stirring function, which allows for more uniform heating of the water temperature in the tank).
4. Temperature setting:
Press the “SET” button to enter the temperature setting state. The last digit of the set value flashes. At this time, press the shift key “←” to the current desired set value position, press the digital adjustment key “1” to set the desired working temperature, and finally press the “SET” button to save the set value. The machine enters automatic control mode.
5. After the experimental work is completed, turn off the power switch, cut off the power supply of the equipment, and clean the water in the sink to keep it dry and clean.
1. Before powering on, fill the water tank with clean water (distilled water or purified water is recommended), and observe for water leakage after filling. The distance between the liquid level and the cover plate should not be less than 2-4cm.
2. Plug in the power, turn on the device, and the upper row of the instrument display window shows the current water temperature value, while the lower row shows the set value.
3. Activate the “Cycle” button (this function is available for models with magnetic stirring function, which allows for more uniform heating of the water temperature in the tank).
4. Temperature setting:
Press the “SET” button to enter the temperature setting state. The last digit of the set value flashes. At this time, press the shift key “←” to the current desired set value position, press the digital adjustment key “1” to set the desired working temperature, and finally press the “SET” button to save the set value. The machine enters automatic control mode.
5. After the experimental work is completed, turn off the power switch, cut off the power supply of the equipment, and clean the water in the sink to keep it dry and clean.
Reviews
There are no reviews yet