Car Honeycomb Tail Light Vinyl Wrap Stickers Waterproof Self-Adhesive Carbon Fiber Film

Specification:
1、Universally suitable for cars, can cut automatically
2、Waterproof, self-adhesive, removable, longer life
3、DIY your own personalized car to make your car more stylish
4、Placement on the vehicle: left, right, front, back, up
5、Material: PVC Film
6、Waterproof: Yes

How to install:
1. Clean the surface that needs to be pasted. Spray the glass water evenly on the surface that needs to be pasted (after cleaning the body, spray water with a sprinkler on the body part that will be pasted) ; mdash; mainly to reduce the sticker viscosity and facilitate the adjustment of position.
2. After determining the position to be affixed, lift the side of the sticker from right to left [or from top to bottom] and press it on the watches with a rag, then affix it, flatten it with a rag and uncover the bottom paper at the same time.
3. When encountering doorknobs or bump-proof bars, the material should be cut and packed or loaded according to the situation.
4. Adjust it in time. After determining the general position of the figure correctly, scrape water and bubbles repeatedly with the scraper, and scrape obliquely from right to left when using the scraper.
5, the door and the sewing part with a knife cut into plastic bags, inward.
6. Try to let the moisture in the car stickers dry completely. If possible, use the air duct to heat and dry them moderately
Strong requirements: do not expose to the sun within 24 hours, and do not wash the car within 48 hours.

Note:
1.Please refer to measurement. Slight measurement errors are allowed within the normal range.
2.There may be a slight color difference due to the monitor, camera or other factors, please refer to the actual product.
3.If you are satisfied with the product, please leave us a 5-star praise, contact us if you have any questions.