JHEMCU ExpressLRS RX24T 2.4G ELRS Radio Nano Long Range Receiver
2.4G ISM type
ESP8285 MCU
SX1280IMLTRT RF
Frequency range: 2400 MHZ To 2500 MHZ
Maximum receiving refresh rate: 500HZ
Minimum receiving refresh rate: 25HZ
Working voltage: 5V
Weight: 0.6g (without antenna)
Size: 11mm*18mm*3mm
RX24T: Half-wave dipole omnidirectional T-shaped antenna
Peak gain: 3.16dB
Indicator status:
Double flash: code matching mode
Slow flashing: No transmission signal is received
Steady on: receive the transmit signal
Fast flashing: WIFI upgrade mode
Linking steps:
1. After the receiver is connected to the flight controller, connect the USB to power the flight controller. After inserting the USB for the first time, disconnect the USB as soon as the LED on the receiver turns off. Repeat the operation twice, when the USB is inserted for the third time, the LED will start to flash double, and the receiver will enter the code matching mode.
2. After correctly connecting the 2.4G ELRS tuner module and the remote control, copy the ELRS.LUA file to the SD card in the remote control, the directory is SD Card/Scripts/tools, and then run ELRS.LUA for Bind operation.
3. After the binding is successful, the LED on the receiver will become steady on, and the telemetry signal can be received at the same time.
Shipping package:
Receiver * 1
Wire * 4
T-type antenna *1
Notice: Regarding the processing of RX24T getting closer after the customer has updated the firmware: Because the RX24T firmware provided in the ELRS system has bugs, please flash the BETAFPV_2400_RX firmware.
Customer –
Thank you
T***k –
Very fast delivery. The radio works perfectly. I am satisfied and recommend the store. T.P
D***o –
Product arrived fast and in good delivery condition. I haven’t tested it yet, but I hope it works out right.
Customer –
Compact, small, powerful. A great choice for small and light drones, easy to bind , carry and install.
C***s –
Works good. Binds right up with no fits. Hope you got good eyes and a steady hand for the solder. It’s very small.
Customer –
So far this receiver has been flawless. Wifi connectivity for setup is great once you know how to do it.
j***r –
Cheap, fast shipping and good before test Cheap, fast shipping and good before test Cheap, fast shipping and good before test Cheap, fast shipping and good before test Cheap, fast shipping and good before test Cheap, fast shipping and good before test
v***r –
looks good. not yet tested
a***r –
everything seems fine
W***n –
New as described and works. Very happy with purchase.
I***v –
Item as described, fast delivery, good seller, thank you!
0***r –
this works great just what I was expecting and the shipping was really quick thank you
A***v –
Looks good, did not installed yet. Fast delivery.
a***r –
super fast shipping firmware is betafpv nano rx
Customer –
very nice. the packing and time to deliver was impeccable. quality is of course great, nothing less from Jhemcu nice!
E***i –
good job, thanks
J***a –
works perfectly!
R***s –
Fast shipping