Operating Voltage : 12V 24V led work lights(DC 9-30V)
LED Wattage : 20W led work light bar(actual is lower than rate power)
Beam color : Red White Blue led angel eye work light bar for car
Led : High Brightness superior quality led chips
Luminous flux : 16800LM
Life:≥50000 hours
Operating temperature : -40～80oC
Waterproof : IP68
Lens material : PC lens
Housing Material : Die-Cast Aluminum
Installation material : stainless steel
Application :
led work light/fog lights for Off-Road,Offroad,ATVs,SUV,truck,Forklift,trains, boat,jeep,4×4,trailers,traktors,go kart,case tractor,uaz,cars,auto.motocycle,crane and mining truck,dozer,road roller,bulldozer,4WD,UAZ,tec.
Warranty : 12 months
A***s –
One very nice product
M***o –
Very good product, it feels very good quality, the materials look good finished and their light is very good, they arrived on time, they are well packaged, I will certainly buy them again.
C***z –
In perfect condition, you just need to test them and install it
J***n –
It came to Me fast, the bad thing is that material inside the Led, it doesn’t work and take it away, I put some photos, the material inside that is outside, without the lighting much better and not a horizontal line—
R***s –
As requested I have already tried them and they have an excellent lighting I recommend them
i***z –
I don’t install them yet, they look very good quality
P***a –
Very beautiful and well finished headlights with a lot of luminosity. Very fast shipping I recommend retail. Thank you
S***o –
They look good, they shine very well and for the price they are exelent
R***o –
Arrived very quickly and in very good condition, it would only be necessary to test and install them
Customer –
Each light draws 1.10A on the main light and 0.13A on the Angel Light, being driven from a 12.8V car battery. The front black surround is plastic. Only two screws into the plastic hold the front plastic and aluminum back together. Wire entry is sealed by epoxy inside. There is a silicon seal on the front but I suspect it will not keep water out due to the way it fits together(I haven’t tested it). I am going to put a silicon bead inside to ensure water tightness. The U bracket is made of very thin material. A magnet sticks to the bracket and the main bolt. The circuit board doesn’t have a good thermal connection with the case. Could do with thermal paste? but would require the wires to be de-soldered and re-soldered to add this. Ok for the price.
C***e –
They feel good quality, just need to install, too much, I believed that the screw that comes to place it on the base is very short, you will have to buy a longer screw
Customer –
I picked a white surround as running lights have to be white or amber where I live. Each light draws 1.10A on the main light and 0.13A on the Angel Light, being driven from a 12.8V car battery. The front black surround is plastic. Only two screws into the plastic hold the front plastic and aluminum back together. Wire entry is sealed by epoxy inside. There is a silicon seal on the front but I suspect it will not keep water out due to the way it fits together(I haven’t tested it). I am going to put a silicon bead inside to ensure water tightness. The U bracket is made of very thin material. A magnet sticks to the bracket and the main bolt. The circuit board doesn’t have a good thermal connection with the case. Could do with thermal paste? but would require the wires to be de-soldered and re-soldered to add this. These lights seem ok given the price. We will see how long they will last.
j***e –
Excellent product had to make an adaptation but all right!
J***s –
Fast arrival