Easy to Read with 180 Degree Removable LCD Display
With a detachable 180° LCD screen and one-touch control buttons, reading measurements has never been easier with the Diivoo water flow meter. It easily connects to a garden hose or hose nozzle with standard 3/4-inch hose threads, eliminating the need for additional adapters
4 Measurement Modes
Freely change from Real-time flow rate, Real-time water volume, Average daily water flow, and Total flow to suit your needs. Measure up to a maximum of 99999L so that you can accurately monitor high-volume water consumption without any limitations
Upgrade Chip with Less than 5% Precision Measurement Error
Press and hold button in auto mode to toggle units (gallons to liters). Press and hold the button for 10 seconds in Totalize mode to perform manual calibration. In other modes press and hold the button to reset the data. The LCD will automatically hibernate if there is no operation/water flow for 1 minute. Built-in Hall sensor and IC chipset for more accurate measurement and more precise calculation.
IP54 Waterproof
With an IP54 rating, our Water Flow Meter is resistant to dust and splashes of water, ensuring durability and longevity even in challenging environments. Take control of calibration with manual calibration support. Fine-tune the meter’s accuracy based on your specific requirements for utmost precision
Designed with a Compact Form Factor
our Water Flow Meter is space-saving and easy to install in any setting. By using our Water Flow Meter, not only will you have better control over your water usage but also contribute towards a greener environment by promoting efficient water management practices. Join us in saving water for a sustainable future


AUTO Mode
In AUTO Mode , press and hold the key for 3s to switch the units of all
modes.(Switch between L and GAL)

Consumption Mode
If the device remains inactive for over 30s, data will be recalculated upon
reactivation.
Press and hold the key for 3s to reset the data.

AVG Mode
Average water usage. (7 days)
Press and hold the key for 3s to reset the data.

TOTAL Mode
Total water usage.
Press and hold the key for 3s to reset the data.

Data calibration



|
Working pressure |
0.5-5 bar(7.25-72.5 psi) |
|
Working flow rate |
1-40L/min(0.3-10.6GPM) |
|
Waterproof |
IP54 |
|
Temperature |
3°C-50°C(37.4F-122 F) |
|
Battery |
CR2032(3V)*1(included) |
|
Maximum data test |
99999L(26416GAL) |
|
Flow accuracy |
±5% |




















f***s –
Product well arrived, according to the photo. Good seller
d***r –
Works perfectly, delivered with several fittings, the top!
C***r –
Nice product, it complies to the description and fulfills my expectations. The packaging to protect the product was appropriate.The overall order processing time from order placement to receipt of the product was relatively short. I would order again at this store.
C***T –
Full received item, but not tried yet
C***s –
Product you arrive fast from it. I have not tried it but it arrived in optimal condition, thank you very much.