HILDA New 2 Lines Laser Level Green Beam Self-Leveling Horizontal And Vertical Cross Super Powerful Mini Portable 레이저 수평계

Description:

Brand: HILDA

Name:2 lines laser level 

Voltage: 220v  

Frequency: 50/60Hz

Laser class: Class II

Laser wavelength: 535 nm

Working distance inside (line): 10-20 m

• Full-layout: Horizontal leveling, vertical alignment, squaring, and plumb point transfer.Use for simultaneous leveling and alignment, and squaring right angles.

• Vertical & Horizontal Cross :With the ability to measure both vertically and horizontally, this laser level is versatile and can be used for a variety of projects.

• Self-Leveling Technology:The laser level has self-leveling technology that ensures accurate measurements every time, even on uneven surfaces.

• Super Powerful Green Laser Beam :The HILDA 2 Lines Laser Level emits a powerful green laser beam that can cover a wide area, making it perfect for large projects.

• 2 Lines Measurement Model:The laser level has a 2 lines measurement model, providing precise and clear lines for accurate placement.

• Smart pendulum system: Self levels and indicates out-of-level condition.

INSTRUCTIONS:

The laser can be used in 2 modes.

1. Pressing the button on the top of the laser will turn thelaser on in angle lock mode, the laser will project in afixed position allowing for a cross to be generated andthen tilted allowing for marks to be made at an angle.While the laser is in angle lock mode, the laser will flashevery 5 seconds to remind you that it is in angle lockmode and is not self-levellingTo turn off the laser while in angle lock mode, pressand hold the button on the top for 5 seconds.

2. Sliding the side power button to on engages self-leveling mode, the laser will now level to a straight horizontal and vertical line, if the laser is placed on a surface that has more than a 3° slant, the laser will rapidly flash. To correct it, move the laser to a flat surface, or adjust the surface accordingly. Slide the side power button back to turn the laser off.

The laser can be directly mounted on to laser accessories such as small tripods or spider clamps using the 1/4″ thread on the bottom of the laser, this can also be adapted to fit larger tripods using the 1/4″ to 5/8″ adaptor (Not included).

Package Includes:

set LS254

1 pc 2 lines laser level

1 pcuser manual

1 pc support

1 pc “L” holder

1 pc black bag

1 pc carbon box

Note: The set is without battery,Please pay attention to the position of the positive and negative electrodes when using the battery, needs 2 AA Alkaline batteries, Placing the wrong battery can cause the machine to be unusable. The black button on the side is a switch.

WARNING Emits Laser Radiation: Avoid direct exposure of the laser beam to the eyes.