Tri-colors Coextruded Filament for You to Enjoy Your Printing From Now on!
Different colors at different angles, you can see rose red, sky blue, green/rose red, dark blue, green. Three colors are integrated in silk PLA filament, and multi-color printing can realize three colors in one model. Therefore, you will easily get all colors, even for very small prints. Printing will be full of surprises as different models will present different effects. Just enjoy your printing from now on!
Recommended Print Setting for the Silk PLA Filament
PLA 3d printer filament is neat on the roll and leaves the spool easily without any crossed turns. It can avoid possible thread pulling, twisting or line breaking, it will make your printing smoother. The PLA filament completely dried for 24 hours before packaging which effectively protect the silk filament from moisture, no stringing and bubble-free. You can just enjoy your printing with pla filament 1.75mm from now on!
Diameter: 1.75mm(Dimensional Accuracy +/- 0.03mm)
Recommended Extrusion/Nozzle Temperature: 190°C – 220°C (374°F – 428°F)
Bed/Platform temperature: 50°C – 60°C (122°F – 140°F)
Print speed: 30-60mm/s
Nozzle≥0.4mm
High Dimensional Accuracy & No Clogging and No Bubble!
1.75mm PLA 3D printer filament with high dimensional accuracy tolerance of + / – 0.03 mm which makes the fusion between the layers very good to obtain an even better bridging result. It will resist warping and produce the cleanest, least stringing prints with glossiest finish. PLA filament 1.75mm will meet your demands for printing freely. The silk PLA filament is 250g/0.55lbs. The PLA filament completely dried for 24 hours before packaging and then vacuum sealed with desiccants. The vaccum package protects the filament from moisture and makes the PLA 3D printing filament no clogging and no bubble when printing.
Tips
1. Before printing, please check the temperature setting as silk PLA filament printing temperature is about 190-220℃. And please make sure that the 3D printer filament is not tangled.
2. Cleaning or changing the nozzle before printing is a good way to reduce jam if the nozzle was used for many times.
3. The filament tends to absorb moisture from air, which can make it brittle or degrade. Please make sure 3D printer filament is to be stored in a sealed bag or box after each print to prevent moisture.
4. The first layer printing speed is recommended to set in 40-60mm/s. It will make the later printing process more conductive.
5. Some PVA glue is recommended to apply if the plate surface has been used for a long time;
6. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate
S***r –
Fast delivery, product as described
D***l –
Good seller and fast, 100 good !! Thanks
D***l –
Nice en fast, thanks from Holland. This seller is 100% good.
J***o –
What a pimp! I love the color. Let’s see how it remains to continue doing work. It is luxurious!
2***r –
Printing to good enough. I would say a good buy
Customer –
Ok
I***g –
Well packaged. Fast delivery. nice color.
S***d –
I would like to thank you, I received the product in good packaging, and earlier than expected time. I recommend it.
O***a –
Good product. Super fast delivery-5 days including checkout day and delivery day. I recommend the seller and this store.
Customer –
Good filament, just what I expected, beautiful prints come out
f***n –
well received well packed
P***s –
Beautiful colors, only thing is that it needs extra glue.
Customer –
Filament very interesting. You can actually see three colors. For the future, I will buy other colors to have interesting prints.
s***x –
not used yet but looks good. very fast postage to UK.
b***n –
Top thank you
a***r –
realy expensive for 250 g but looks good on my boat
C***A –
Not tested, but I think will be fine, nice colors ..
P***r –
The color combi is awesome too bad that does not exist in 1kg
v***s –
got.here fast and looks great camt wait to use it