Car Battery Disconnect Switch 12-48V 2 Position M10 275A Cut Off for Marine Boat
Price range: $18.99 through $19.99
Car Battery Disconnect Switch 48V 24V 12V Cut Off 2 Position 2 Pin M10 275A Battery Connection Switch For Marine Boat Auto RV
By DaierTek
About this item
-
【EASY OPERATION】Rating: 275A DC Continuous (1hr), 455A DC Intermittent (5 min), 1250A DC Cranking (10 sec); Stud Size: 2×5/16″ (8mm); Switch on = Power; Switch off = No power. Recommend to install on the negative side of the battery (lower current in negative, will be more safety)
-
【DURABLE MATERIAL】This battery master switch is made of durable plastic housing, tinned copper studs and nuts. Come with 4 stainless steel mounting screws and caps to help fix the switch tightly. Removable rear cover insulates the rear terminals against any short circuits. 4 Removable side plates provided access for battery cables
-
【COMPATIBLE】This battery disconnect switch is used for DC 12 – 48V systems to isolate and secure the electrical system, can stand alone or be locked together with other switch, simple and economical way to separate batteries
-
【NO MORE BATTERY DRAIN】This battery isolator switch provides a reliable way to shut down electrical power during maintenance and protect batteries from excessive drain when vehicle or boat is not in use
-
【WIDE APPLICATION】This battery kill switch is widely used for Car, Marine, Boat, RV, Camper, Travel Trailer, Truck, ATV, UTV, Battery banks and other electrical equipment’s switch, such as flashing light, chassis light, fog light, dome light
Specification:
2 Position: On Off
Voltage: 12V-48V
Rating:
-
275A DC Continuous (1hr)
-
455A DC Intermittent (5 min)
-
1250A DC Cranking (10 sec)
Terminal material: Tinned copper
Terminal Diameter: 2×3/8″ (M10)
Package Include:
-
1 x Battery Switch
-
4 x Removable Side Plate
-
1 x Rear Cover
-
4 x Screw
-
4 x Nut
Super Safety & Well Built:
-
This battery master switch is made of durable plastic housing, tinned copper studs and nuts.
-
It features superior performance and good conductivity. Rust and corrosion resistant, durable made for safety use.
-
Come with 4 stainless steel mounting screws and caps to help fix the switch tightly. Removable rear cover insulates the rear terminals against any short circuits. 4 Removable side plates provided access for battery cables.
|
|
|
|
Easy to Use:This battery disconnect switch is used for DC 12 – 48V systems to isolate and secure the electrical system, can stand alone or be locked together with other switch, simple and economical way to separate batteries. |
No More Battery Drain:This battery kill switch can disconnect the battery safely. It provides a reliable way to shut down electrical power during maintenance and protect batteries from excessive drain when vehicle or boat is not in use. |
Widely Applications:Widely used for Car, Marine, Boat, RV, Camper, Travel Trailer, Truck, ATV, UTV, Battery banks and other 0-48V Devices. |
About this item
-
Operation: 1-2-both-off, 4 position, 200A DC Continuous (1hr), 455A DC Intermittent (5 min), 1250A DC Cranking (10 sec); Voltage: 12V-48V DC; Stud Size: 3 x 5/16″ (8mm), 3 mounting screw holes (8mm diameter) for 8-10MM screw connection (not included mounting hardware)
-
The patented contour locking system, allowing it to be a stand alone unit, or locked together with other switches to isolate and secure the electrical system, offers a simple economic way of separating two batteries
-
This battery cut shut off kill switch has four removable side plates. The rear cover insulating the rear terminals against any short circuits. Equipped with 4 sets of bolts
-
Tin-plated copper studs and nuts; Ignition-protected. ABS plastic housing, durable made for safety use
-
Widely used for Car, Marine, Boat, RV, Camper, Travel Trailer, Truck, ATV, UTV, Battery banks and other 0 up to 60V Devices; 1 Year Warranty–a replacement or refund is guaranteed
Specification:
4 Position: 1-2-Both-Off
Rating:
200A DC Continuous (1hr)
455A DC Intermittent (5 min)
1250A DC Cranking (10 sec)
Voltage: 12V-48V DC
Stud Size: 3 x 5/16″ (8mm)
Package Include:
-
1 x Battery Switch
-
4 x Removable Side Plate
-
1 x Rear Cover
-
4 x Screw
-
4 x Nut
Come with 4 stainless steel mounting screws and caps to help fix the switch tightly. Removable rear cover insulates the rear terminals against any short circuits. 4 Removable side plates provided access for battery cables.
No More Battery Drain:
-
This battery master switch can disconnect the battery safely.
-
It provides a reliable way to shut down electrical power during maintenance and protect batteries from excessive drain when vehicle or boat is not in use.
Tips for Buying and Using a Battery Disconnect Switch:
1. Check the amperage rating before buying to know if the switch is suitable for the battery of your vehicle, boat, or RV. Different modes of transportation have different alternators that output varying power levels.
2. Always remember to turn off your vehicle before disconnecting the battery. This will prolong the lifespan of the battery, the electrical components, and the disconnect switch.
3. Avoid random power cuts or you risk damaging the locking navigation system and other anti-theft features.
4. When replacing the battery, disconnect the switch—starting with the negative terminal.
5. If you are not sure about installation, consult a professional to avoid system failure.
|
|
|
|
Easy to Use:
|
Super Safety & Well Built:
|
Wide Application:Widely used for Car, Marine, Boat, RV, Camper, Travel Trailer, Truck, ATV, UTV, Battery banks and other 12-48V Devices. |
How to Install
|
|
|
|
Connected Battery A |
Connected Battery B |
Connected Battery A & B |
| Weight | 0.246 lbs |
|---|---|
| Dimensions | 8 × 7 × 7 in |
| Brand Name | Daiertek |
| Origin | |
| High-concerned chemical | None |
| Is It Charged | No |
| Item Height | 6.7 |
| Product Type | Switches and accessories |
| Item Weight | 0.27 |
| Year | 2022 YEAR |
| Material | ABS |
| Item Length | 6.9 |
| Item Type | Battery Switch |
| Special Features | battery disconnect switch 48v |
| Item Width | 6.9 |
| Model Name | ASW-A701/ ASW-A701S |
| Item | car battery disconnect switch |
| Type | battery switch 12V cut off |
| Position | battery switch 4 Position 2 Position |
| Function | ON-OFF / 1-2-Both-OFF |
| Size | 69X69X67MM |
| Voltage | 12V-48V DC |
| Continuous Current | 300A(12V), 150A(24V), 75A(48V) |
| Choice | yes |
14 reviews for Car Battery Disconnect Switch 12-48V 2 Position M10 275A Cut Off for Marine Boat
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
V***g –
As described.
Color: 2PIN ON-OFF M10
I***n –
Very happy with the purchase, i recently purchased the same item and have installed it on my solar system. I am so happy with it i purchased another for a future project because the quality is very good and it looks great. I am happy to recommend this item very easy to install and comes with all fixtures.
Color: 2PIN ON-OFF M10
A***z –
Perfect operation. For a motorcycle under the seat, it went perfectly.
Color: 2PIN ON-OFF M10
V***g –
As described.
Color: 3PIN 1-2-both-OFF M8
S***G –
Good quality; fast delivery. Very satisfied with the purchase. Recommended.
Color: 2PIN ON-OFF M10
S***n –
As described, I recommend the seller.
Color: 2PIN ON-OFF M10
A***r –
Color: 2PIN ON-OFF M10
F***g –
The switch works well and is of good quality. Everything is top-notch.
Color: 2PIN ON-OFF M10
j***r –
Perfect, the screws are long enough to fix it on a support.
Color: 3PIN 1-2-both-OFF M8
T***i –
Ok
Color: 2PIN ON-OFF M10
a***d –
Color: 2PIN ON-OFF M10
L***d –
This switch is pretty good. Feels the same as the locally available ones for 5x the price. It definitely isn’t as solid as the expensive brand name items, but for the money i’m impressed.
Color: 3PIN 1-2-both-OFF M8
Anonymous –
Good quality switch. Second one i’ve bought from them.
Color: 2PIN ON-OFF M10
Anonymous –
100% recommend
Color: 2PIN ON-OFF M10